Kilograms per cubic metre to Grams per litre Converter kg/m³ → g/L

1 kilogram per cubic metre (kg/m³) = 1 grams per litre (g/L). Type a value below, the conversion happens instantly, entirely on your device.

From

1 kg/m³ = 1 g/L

Precision

1.225 kilograms per cubic metre = 1.225 grams per litre

1.225 × 1 = 1.225

1 kg/m³ equals 1 g/L, so multiplying by 1 converts the value. The result describes the exact same quantity, only the measuring stick changes.

Rate this tool:

Anonymous, no account, no identifier

How to convert kilograms per cubic metre to grams per litre

grams per litre = kilograms per cubic metre × 1, multiply the kilogram per cubic metre value by 1.

Example: 1.225 kg/m³ = 1.225 g/L.

To convert the other way: kilograms per cubic metre = grams per litre ÷ 1

Kilograms per cubic metre and grams per litre are numerically equal (both 1/1000 of g/cm³ scaling): air at 1.225 kg/m³ is 1.225 g/L. Gas densities are often quoted in g/L.

Kilograms per cubic metre to Grams per litre conversion table

Kilograms per cubic metre (kg/m³)	Grams per litre (g/L)
0.1	0.1
0.25	0.25
0.5	0.5
1	1
2	2
3	3
4	4
5	5
6	6
7	7
8	8
9	9
10	10
15	15
20	20
25	25
30	30
40	40
50	50
75	75
100	100
250	250
500	500
1000	1000

About the units

What is a kilogram per cubic metre?

The SI unit of density, mass in kilograms per cubic metre. Water is 1,000 kg/m³; air at sea level about 1.225 kg/m³.

What is a gram per litre?

One gram per litre equals 1 kg/m³. Used for dilute solutions and gas densities.

Frequently asked questions

How many grams per litre are in 1 kilogram per cubic metre?

1 kilogram per cubic metre (kg/m³) = 1 grams per litre (g/L).

What is the formula to convert kilograms per cubic metre to grams per litre?

grams per litre = kilograms per cubic metre × 1, multiply the kilogram per cubic metre value by 1.

How do I convert kg/m³ to g/L without a calculator?

Multiply by 1 for a close estimate. Exact factor: 1 kg/m³ = 1 g/L.

Is this kg/m³-to-g/L converter accurate and private?

Yes. It uses the exact internationally defined conversion factors and computes results locally in your browser, your input is never sent to a server, and the page keeps working offline.